Sculpt Nouveau Patinas Supplier in Delhi

Product Details:

Deep Brown Patina creates a slow reacting brown finish on bronze, brass, and copper. On iron and steel, it will produce a quick dark brown patina with greys and blacks. On zinc, the finish is a fast developing yellow brown. It should not be used on stainless steel. Deep Brown Patina does not need to be diluted, but may be thinned with distilled water for lighter coats or colors. Additional coats will darken the patina.

Product Details:

Product Details:- Black Magic Patina creates a beautiful, rich black patina on iron and steel. It takes only 3-5 minutes to develop and does not produce the quick rust that you normally see with other blackening agents. The first coat will be dark grey, but the finish will become black after a few coats. Rust will develop if a clear sealer is not applied to the completed finish.

Black Magic Patina works similarly on bronze, brass, and copper to darken the metal. On zinc and galvanized steel, it creates a weathered black patina. Black Magic Patina does not work on stainless steel or aluminum. It should not be diluted unless you are working on the Metal Coatings.

 

Product Details:

Product Details:- Traditional Rainbow and Torch Patinas are very interesting finishes. Depending on the application method and the metal used, many different finishes can be created using these patinas. Traditional Rainbow and Torch Patinas are available in 8oz., 32oz., 1gal., and 5gal. sizes. Spray tops are included with 8oz. and 32oz. bottles. One gallon of Traditional Rainbow or Torch Patina generally covers 200 sq. ft.

For best results, apply Rainbow Patina to a shiny and clean metal surface. This patina does not work with the Metal Coatings.

Rainbow Patina on Brass:

• Clean metal with Metal Cleaner (do not sandblast).
• Apply two coats of Rainbow Patina to hot metal (200-220 F).
• Additional coats will bring more silver colors.
• Wash while hot for brightest colors.
• When dry, protect the finish with 2 coats of Clear Guard.

Rainbow Patina on Copper:

• Clean metal with Metal Cleaner (do not sandblast).
• Apply 1-2 coats of Rainbow Patina to hot metal (200-220 F).
• Do not wash.
• When dry, protect the finish with 2 coats of Clear Guard.
• The color will continue to develop for 1-2 days.

Rainbow Patina on Stainless Steel:

• Clean metal with Metal Cleaner (do not sandblast).
• Apply many coats of Rainbow Patina to hot metal (200-220 F).
• Wash while hot.
• When dry, protect the finish with 2 coats of Clear Guard.

On iron and steel, Torch Patina is designed to be used over a base of Copper Plate Patina to create the torch effect. The uniformity and colors of the patina are determined by the application techniques. Without the Copper Plate Patina base, Torch Patina will turn steel a mixture of black, grey, and rust.

On Bronze, Brass, and Copper, Torch Patina is designed to be applied directly to clean metal.

 

Product Details:

Our presented range of Traditional Tiffany Green Patina is broadly employed in the market for their durable nature. Due to their top features, these are enormously demanded in the market.

Product Details:

White Bismuth Patina produces an off-white finish on bronze, brass, and copper. It is applied hot (180-200°F) and may be diluted up to 50% with distilled water. White Bismuth is commonly used as a base patina for other hot patinas such as Ferric Nitrate.

Product Details:

Slate Black Patina is a versatile black finish for use on most metals. On iron and steel, it will produce a black patina with some brown showing through the finish. This is a fast 3-5 minute reaction that is arrested with water. Additional coats will darken the patina. Slate Black Patina can be diluted with distilled water for lighter coats.

Product Details:

Darkening Patina is most commonly used cold on bronze, brass, and copper to produce a beautiful brown finish. This patina is often diluted with distilled water before use to lighten the color. Normal colors will range from golden brown to very dark brown (almost black). On iron and steel, Darkening Patina will create a grey to black finish. On zinc, this patina will also be black.

Product Details:

Product Details:- The Birchwood Gels make it easier to achieve an even patina and work well on vertical surfaces. One gallon of a Birchwood Gel Patina generally covers 200 sq. ft. per coat. They are available in 8oz., 32oz., 1 gallon, and 5 gallon sizes. The  Birchwood Gel Patinas are not concentrated and are ready to use.

Gel solutions for Bronze, Brass, and Copper:

• Antique Black Gel (M-24).
• Antique Brown Gel (M-38).

Gel solution for Iron and Steel:

• Presto Black Gel (PC-9).

Product Details:

Liquid solutions for Iron and Steel:

• PC-9 Presto Black (Gun Bluing) spray, brush, or immersion.

Product Details:

Liquid solutions for Bronze, Brass, and Copper:
M-38 is a spray, brush or immersion Brown Antiquing Solution.

Product Details:

Copper Rust Patina causes a red to brown finish on bronze, brass, and copper. This cold patina should not need to be diluted. It will blacken iron and steel if applied hot. Copper Rust Patina does not work on the Metal Coatings.

Product Details:

Product Details:- Jade Green Patina is a hot or cold patina for bronze, brass, and copper. If applied cold, the color develop into kelly green in about 12 hours. If applied hot, the color will be jade green when used with the Universal Black or Black Dye-Oxide Patinas. The finish should be protected with 2 coats of Clear Guard.


Light Green Patina is a cold patina for bronze, brass, and copper. Apply to a clean, cold (65-70F) metal. It will take 2-12 hours to completely react with the metal.

Product Details:

Tan Patina creates an opaque tan finish on all metals. It is applied hot or cold depending on the surface. Tan Patina is often layered with other Traditional Brown Patinas such as Ferric Nitrate or Japanese Brown. It is also commonly used cold on the Metal Coatings, especially iron, to produce rust. It may be diluted up to 50% with distilled water for a lighter finish.

Product Details:

Liquid solutions for Bronze, Brass, and Copper:

• M-24 is a spray or brush Black Antiquing Solution.

Product Details:

Product Details:- Traditional Light Green Patinas are available in 8oz., 32oz., 1 gallon, and 5 gallon sizes. Spray tops are included with 8oz. and 32oz. bottles. Liver of Sulfur is sold as a powder in 2oz., 4oz., and 16oz. sizes by weight. One gallon of Traditional Brown Patina generally covers 200 sq. ft.

Light Green Patina creates an aged brown to black finish on bronze, brass, and copper. On iron, steel, aluminum, and zinc, it will produce a grey to black patina. It should not be used on stainless steel. Antiquing Patina does not need to be diluted, but may be thinned with distilled water for a lighter finish. This cold patina is commonly used on the Metal Coatings and as a base for Traditional Green Patinas.

Copper Plating Patina produces a copper finish on iron and steel. Applied cold, lighter coats will develop a salmon copper color while heavier coats will produce darker copper colors. Copper Plating does not work with the Metal Coatings or most other patinas such as Tiffany Green. However, it can be used as a base for the Traditional Torch Patina. Diluting should not be necessary with this formula.

 

Product Details:

Copper Plating Patina produces a copper finish on iron and steel. Applied cold, lighter coats will develop a salmon copper color while heavier coats will produce darker copper colors.

Product Details:

Product Details:- Traditional Brown Patinas are available in 8oz., 32oz., 1 gallon, and 5 gallon sizes. Spray tops are included with 8oz. and 32oz. bottles. Liver of Sulfur is sold as a powder in 2oz., 4oz., and 16oz. sizes by weight. One gallon of Traditional Brown Patina generally covers 200 sq. ft.

Antiquing Patina creates an aged brown to black finish on bronze, brass, and copper. On iron, steel, aluminum, and zinc, it will produce a grey to black patina. It should not be used on stainless steel. Antiquing Patina does not need to be diluted, but may be thinned with distilled water for a lighter finish. This cold patina is commonly used on the Metal Coatings and as a base for Traditional Green Patinas.

Copper Plating Patina produces a copper finish on iron and steel. Applied cold, lighter coats will develop a salmon copper color while heavier coats will produce darker copper colors. Copper Plating does not work with the Metal Coatings or most other patinas such as Tiffany Green. However, it can be used as a base for the Traditional Torch Patina. Diluting should not be necessary with this formula.

 

Product Details:

brown patina

Product Details:

use over aluminium, reactive patina

Product Details:

 Amjay Exports Private Limited is a well-known Manufacturer and Wholesale Trader of Sculpt Nouveau Patinas, Door and Window Hardware , Sheet Metal Components and many more. All these products are quality assured by the quality assurance executive to ensure perfect qualities and longer life. Highly demanded in different industries, these products are accessible from the market in different shapes, sizes and configurations


use over stainless steel, its a reactive patina

Product Details:

Product Details:- Ever Clear Super Gloss should be applied with a soft cloth, brush, or spray. It will dry hard in 3-12 hours. Clear Guard or Metal Wax may be applied over the oil. Metal Oil is available in clear, black, blue, brown, green, red, and yellow colors and 8oz., 16oz., 32oz., 1 gallon, and 5 gallon sizes. One gallon of Metal Oil generally covers 300 sq. ft. per coat.

Product Details:

Sculpt Nouveau Ever Clear is a two part clear, durable, low VOC, air drying polyurethane. It is formulated for use on bronze, brass, copper, steel, wood, terracotta, ceramics, and concrete. When compared with other clear coats, Sculpt Nouveau Ever Clear provides unusual under-film tarnish protection as well as superior resistance to UV light, salt air environments, and most chemicals. It also makes an excellent anti-graffiti coating.

Product Details:

Cupric Nitrate is a classic hot patina for bronze, brass, and copper resulting in a blue green finish. If used on iron or steel, rust will occur. Cupric Nitrate is commonly used over the top of a base patina such as Traditional Liver of Sulfur or Ferric Nitrate Patinas to add more depth and contrast to the finish.