Sculpt Nouveau Metal Coating

Product Details:

The Metal Coatings are very durable outside (10 to 15 years) and are non-hazardous. One Gallon of Metal Coating will cover 100 square feet (this includes the recommended two layers).

Product Details:

Instructions:-The Metal Oil should be applied with a soft cloth, brush, or spray. It will dry hard in 3-12 hours. Clear Guard or Metal Wax may be applied over the oil. 

Product Details:

The Metal Coatings are ground metal suspended in a non-toxic water based acrylic binder. They may be applied to both metal and non-metal surfaces such as glass, wood, ceramics, concrete, foam, and resin.

Product Details:

Product Details:- The Metal Coatings are ground metal suspended in a non-toxic water based acrylic binder. They may be applied to both metal and non-metal surfaces such as glass, wood, ceramics, concrete, foam, and resin.

All of the Dye-Oxide Patinas, Universal Patinas, Vista Patinas, Solvent Dyes, Patina Stains, and Finishing Waxes work well with the Metal Coatings allowing endless possibilities for finishes. Among the Traditional Patinas, Liver of Sulfur (brown) and Tiffany (green) patinas work the best with the Metal Coatings.


The Metal Coatings are very durable outside (10 to 15 years) and are non-hazardous. One Gallon of Metal Coating will cover 100 square feet (this includes the recommended two layers).


The Metal Coatings are available in two different formulas - B and C. Patinas may be applied to both whether wet or dry. Once dry, either may be burnished with steel wool in order to highlight or adjust the patina. Additionally, more patina may be added after burnishing. Type C contains more metal than Type B and dries hard enough to be polished with a polishing wheel. Type C comes bundled with a catalyst and hardener.

Type B is available in brass, bronze, copper, darkened iron, gold, iron, pewter, and silver and is sold in 8oz., 16oz., 32oz., 1 gal., and 5 gal. sizes. Type C is available in brass, bronze, copper, darkened iron, gold, iron, and silver and is sold in 8oz., 16oz., 1 gal., and 5 gal. sizes.

When applying the Metal Coatings to ferrous metals (iron, steel, and aluminum), a primer must be used to protect the underlying metal.

Product Details:

Original Blue is a cold patina for bronze, brass, copper, and the Metal Coatings resulting in a light, pale blue to turquoise finish. Like the Powder Blue Patina, it should be allowed to develop for 24 hours before sealing.

Product Details:

 Amjay Exports Private Limited is a well-known Manufacturer and Wholesale Trader of Sculpt Nouveau Patinas, Door and Window Hardware , Sheet Metal Components and many more. All these products are quality assured by the quality assurance executive to ensure perfect qualities and longer life. Highly demanded in different industries, these products are accessible from the market in different shapes, sizes and configurations

Product Details:

The Metal Oil should be applied with a soft cloth, brush, or spray. It will dry hard in 3-12 hours. Clear Guard or Metal Wax may be applied over the oil. 

Product Details:

The Metal Coatings are ground metal suspended in a non-toxic water based acrylic binder. They may be applied to both metal and non-metal surfaces such as glass, wood, ceramics, concrete, foam, and resin.

Product Details:

The Metal Coatings are very durable outside (10 to 15 years) and are non-hazardous. One Gallon of Metal Coating will cover 100 square feet (this includes the recommended two layers).

Product Details:

The Metal Oil should be applied with a soft cloth, brush, or spray. It will dry hard in 3-12 hours. Clear Guard or Metal Wax may be applied over the oil. 

Product Details:

The Metal Coatings are very durable outside (10 to 15 years) and are non-hazardous. 

Product Details:

Product Details:- The finest quality waxes have been blended into a nonabrasive formula specifically to protect patinas and metal finishes. These waxes contain UV inhibitors and hardeners making them incredibly durable and long lasting on all types of metal.
Metal Wax is available in 2oz., 8oz., 16oz., 32oz., and 1 gallon sizes. One gallon of Metal Wax generally covers 300 sq. ft. per coat.
General Tips:
The Metal Waxes may be applied to warm or cold surfaces. They should not be applied to extremely hot surfaces.
Smooth down any ridges or bumps during application. Stippling with a brush may be the preferred method of application so as to not create streaking on the surface. Try not to let the clear wax fill up in any recessed areas as it may turn opaque when dry. Build up in recessed areas is commonly desirable with the colored waxes.
Burnish the finish when the wax is dry (usually 1-2 hours). The colored waxes generally take longer to dry. If the wax is applied to a hot surface, allow the surface cool down completely, then buff. Use a lint-free cloth (such as a microfiber cloth) to buff. Do not wait too long as the wax will become too hard to burnish.

Product Details:

Japanese Brown may be used on bronze, brass, and copper resulting in a golden brown finish, but it is most commonly used hot or cold on iron and steel. When applied cold to iron or steel, a brown rust will form. On heated iron or steel, a dark chocolate finish will result. Heat will darken the color as well as reduce mottling.

Product Details:

Product Details:- All Birchwood patinas are considered traditional patinas that will age or darken metal. These patinas are sold concentrated and should be diluted with distilled water (up to 50%) before use. Once diluted, one gallon of Birchwood Liquid Patina generally covers 200 sq. ft.

Birchwood Liquid Patinas are available in 8oz., 32oz., 1 gal., and 5 gal. sizes. Spray tops are included with 8oz. and 32oz. bottles. A clear sealer should be applied when completed to protect the finish.

Liquid solutions for Bronze, Brass, and Copper:

• M-38 is a spray, brush or immersion Brown Antiquing Solution.
• M-24 is a spray or brush Black Antiquing Solution.
• M-20 is the same Black Antiquing Solution as M-24, but is made for an immersion (dipping) process.

Liquid solutions for Iron and Steel:

• PC-9 Presto Black (Gun Bluing) spray, brush, or immersion.
• BST4 Presto Black room temperature, brush-on solution.
• Plum Brown Barrel Finish (32oz. only).

Liquid solutions for Aluminum:

• A-14 Aluma Black spray or brush Black Antiquing Solution for Aluminum.
• A-15 is the same Black Antiquing Solution as A-14, but is made for an immersion process.

Liquid soultion for Pewter:

• PB-1 Black Antiquing Solution for Pewter.

Liquid solution for Stainless Steel:

• SSB Presto Black for Stainless Steel.

Product Details:

Clear Guard is UV stable and highly resistant to weather, water, and chemical damage. It also resists marring and perspiration better than most solvent lacquers.

Product Details:

Product Details:- Sculpt Nouveau Metal Cleaner and Degreaser has been specially developed for the rapid and complete removal of rust, dirt, oil, and grease from most metal surfaces in preparation for finish applications.


This ready-to-use formula removes oxidation quickly and efficiently without leaving any residue or buildup that would prevent finish adhesion. Additionally, the Metal Degreaser contains corrosion inhibitors that protect the metal surface during cleaning.


The Metal Cleaner and Degreaser is not a polish and will remove the finish on polished and plated surfaces. It is available in 8oz., 32oz., and 1 gal. sizes. The 8oz. and 32oz. sizes include a spray top. One gallon of Metal Cleaner and Degreaser generally covers 200 sq. ft. per coat. Two to three coats are recommended.

Product Details:

This amazing one part, water base, no VOC primer was designed for use in severe industrial environments for the protection of steel structures. It provides excellent chemical, abrasion, and corrosion resistance.

All surfaces should be cleaned before applying the primer. Spray or brush on.

Product Details:

The Metal Coatings are very durable outside (10 to 15 years) and are non-hazardous. One Gallon of Metal Coating will cover 100 square feet (this includes the recommended two layers).